Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Buderus Logano G124 Hard Reset

PhotoMat
Member Posts: 1
For some time, my Buderus G124 occasionally requires a hard reset by switching off the boiler. The boiler was cleaned, but the problem persists. When the boiler misfires and shuts down, there is a green blinking light that flashes a 6-2 sequence. I assume that this is an error code. Is there a source for tracking down this info?
0
Comments
-
did i ever figured out the problem? i am getting the same pattern 😟0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements