Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Taco RMBs booting to different screens?
JeffM
Member Posts: 182
I monitor a family vacation house in Maine which has three Taco RMBs running radiant zones. The RMBs don't have remote (internet) access, so I monitor their mix supply water temps with a webcam that sees the LCD displays. I noticed recently after a power failure that one of the three had rebooted to a different display than the others (it shows Outdoor temp now instead of Mix Supply). Nothing else seems to have changed, they run fine I just cant see the mix temp from one after a power outage (which happen regularly in coastal Maine). Has anyone else seen this before, or have any ideas of why it might be happening or what I could do to get this RMB to reboot the same as the others? It has happened twice now so isn't just a fluke. A simple press of the Item button resolves this of course, but that's hard to do from 2000 miles away...
0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements