Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Help finding 1-1/4 x 3/4 Cast Iron / Steel Monoflo Diverter Tees
sixplex
Member Posts: 89
Hi Guys,
I badly need 2 monoflow tees to fix an error the builder made 70 years ago with the heating system in my place.
I need the kind with the cone/circle/orifice inside, not the ramp.
Any help would be extremely appreciated. I'll pay whatever is necessary within reason.
I badly need 2 monoflow tees to fix an error the builder made 70 years ago with the heating system in my place.
I need the kind with the cone/circle/orifice inside, not the ramp.
Any help would be extremely appreciated. I'll pay whatever is necessary within reason.
0
Comments
-
You've been searching for a monoflo tee since 1953? A 70 year quest What lol. You should of asked One of the Dead Men while they were still Alive Men.
One of the wallies need to hook this guy up. Hes been shivering in the dark for 70 years. That is some brand loyalty you have sir.0 -
Pretty much, haven't got much time left, gotta get it done before i go.
It's ironic that Monoflow is a pretty big topic on this site but there aren't actually any monoflow steel tees available0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements