Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
American Standard Gas Boiler Burner Tubes

Chombies
Member Posts: 1
in Gas Heating
Hello, I am currently working on replacing a couple of burner tubes for an old American Standard 3B J2 GPH-135 Gas Boiler. I am having a hard time finding replacement tubes. They are 18.5" in total length. Any help would be appreciated.
0
Comments
-
American Standard has not made boiler for probably 30 years so you may be out of luck. I think maybe Burnham bought them. @Steamhead would know.
I suppose you could try new burners and a new manifold from another MFG but the center to center spacing would have to be right. Probably not worth fiddling with from a safety standpoint. Probably time for a new boiler1
Categories
- All Categories
- 84.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 421 Carbon Monoxide Awareness
- 58 Chimneys & Flues
- 1.8K Domestic Hot Water
- 5K Gas Heating
- 124 Geothermal
- 158 Indoor-Air Quality
- 3.2K Oil Heating
- 57 Pipe Deterioration
- 830 Plumbing
- 5.6K Radiant Heating
- 373 Solar
- 14.3K Strictly Steam
- 3.1K Thermostats and Controls
- 55 Water Quality
- 42 Industry Classes
- 83 Job Opportunities
- 24 Recall Announcements