Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Burnham Series 2 Spare Parts Recommendations

PilotPat24
PilotPat24 Member Posts: 106
in Gas Heating
Hello,

I have a Burnham Series 2 boiler that's a few years old now.  Just wondering if there should be any spare parts anyone recommends I should keep on hand just in case of a no heat condition.  Thanks in advance.

Pat

Comments

  • hot_rod
    hot_rod Member Posts: 24,555
    It’s hard to know what will fail. The spare parts list depends a lot on your budget 🤔
    If it is ignition, all the parts in the fire are good to have, igniter rod , any flame sensor and wiring. As far as gas valve, control module, vent damper, that can get $$

    The last page in the manual usually has an exploded view of all the parts.

    I kept an entire boiler in my shop for spares parts as I used one brand mainly
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    PilotPat24
  • HVACNUT
    HVACNUT Member Posts: 6,607
    Standing pilot? Spare thermocouple. 
    Vent damper can be bypassed if it has one.
    A circulator is nice to have on hand.
  • PilotPat24
    PilotPat24 Member Posts: 106
    HVACNUT said:
    Standing pilot? Spare thermocouple. 
    Vent damper can be bypassed if it has one.
    A circulator is nice to have on hand.
    It has electronic spark ignition.  A spare circulator would be good to have on hand.

Categories