Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Disconnect AM10 on GB142
skiwater9
Member Posts: 1
in Gas Heating
We have a GB142-40 with AM10....no error codes but only intermittently working. How can I disconnect the AM10 to troubleshoot to determine if that is the issue? It fires intermittently and only heats to about 110F.
0
Comments
-
Hello @skiwater9,
See pages below, may help.
Page 104
https://www.powerequipmentdirect.com/manuals/GB142Service.pdf
Page 7
https://inspectapedia.com/heat/Bosch-Buderus-AM10-Modulating-Outdoor-Reset-Control-Manual.pdf
National - U.S. Gas Boiler 45+ Years Old
Steam 300 SQ. FT. - EDR 347
One Pipe System0 -
Sounds like you have a loose connection .
There was an error rendering this rich post.
0
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 927 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements