Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burnham Series 3 Outdoor Reset
Gauss79us
Member Posts: 3
I would like to add the outdoor reset to my series 3 IQ controlled boiler. There is a wireless temp. trans/recv. option and it is shown as an option to wire it directly to the Envirocom terminals on the main control board. If I purchase the wireless temp transmitter. Do I also need to purchase the Outdoor Reset card, or does the main controller handle that functionality?
0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements