Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Weil McLain CGI series

AndrewHern
Member Posts: 8
hi everyone. I was looking into replacing my old cast iron boiler with a new one. I wanted to move the boiler and water heater to a different location in our basement. Therefore, we are going to be about 12 feet from our chimney or sidewall venting. That is why I was looking into the Weil McLain cgi boilers because their venting options are a bit more flexible. Any opinions on the cgi models? Any experience dealing with them? Are they loud?
I have also heard of the Weil McLain gv90+ series, but not sure about those. Any advice would be greatly greatly appreciated. Thank you guys.
also, should I use my new chosen boiler with an indirect water heater?
Andrew
0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements