Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Clanky Trap, why?
guzzinerd
Member Posts: 282
So i finally received the last three trap rebuild kits for the Sarco T25 s. I opened the first up only to find out that I'll need new taller lids as well.
After putting the original assembly back together it started this clanking at 5am. Unfortunately the unit is occupied with an Airbnb customer so i removed the diaphragm while the new tops are made and shipped to me.
My questions are:
- why did it start clanging after removing and putting it back in?
- is there something else i could have done other than remove the diaphragm to get rid of the clanking? (It was quiet before opening it)
Thanks
Video:
https://youtube.com/shorts/91R658JnmDI?feature=share
After putting the original assembly back together it started this clanking at 5am. Unfortunately the unit is occupied with an Airbnb customer so i removed the diaphragm while the new tops are made and shipped to me.
My questions are:
- why did it start clanging after removing and putting it back in?
- is there something else i could have done other than remove the diaphragm to get rid of the clanking? (It was quiet before opening it)
Thanks
Video:
https://youtube.com/shorts/91R658JnmDI?feature=share
Bryant 245-8 2-pipe steam in a 1930s 6-unit 1-story apt building in the NM mountains. 26 radiators heating up 3800sqf.
0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 919 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements