Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Entran 3 still good?
CBRob
Member Posts: 283
Curious as to how urgent the situation is with entran 3 and its deterioration.
Is it all going brittle or isolated cases?
Does it lack o2 barrier?
If a house is mid remodel would it be smart to just tear out the tubes and be gypcrete now or can entran 3 that is protected by gypcrete going to last another 30 years?
Is it all going brittle or isolated cases?
Does it lack o2 barrier?
If a house is mid remodel would it be smart to just tear out the tubes and be gypcrete now or can entran 3 that is protected by gypcrete going to last another 30 years?
0
Comments
-
TwinTran and Entran2 were the problem tube
Entran 3 was the first with an oxygen barrier
It then became Onix
Oxygen nix was allegedly the concept in the name OnixBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Do you think it's possibly good for another few decades?
0 -
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements