Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Can you provide a sketch of Burnham Series 2E when the Indirect Water Heater is omitted?
gasfiredwaterboiler
Member Posts: 1
Can you provide a sketch (and if possible, a photo of a similar layout) of the piping if I omit the Indirect Water Heater as shown in the attached image taken from page 11 of the Burnham Series 2 installation manual? I will be using the Caleffi NA553362 Boiler Trim Kit w/ AutoFill & Backflow & 1" Threaded Air Separator & 4.4 Gal. Expansion Tank.
0
Categories
- All Categories
- 84.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 421 Carbon Monoxide Awareness
- 58 Chimneys & Flues
- 1.8K Domestic Hot Water
- 5K Gas Heating
- 124 Geothermal
- 158 Indoor-Air Quality
- 3.2K Oil Heating
- 57 Pipe Deterioration
- 830 Plumbing
- 5.6K Radiant Heating
- 373 Solar
- 14.3K Strictly Steam
- 3.1K Thermostats and Controls
- 55 Water Quality
- 42 Industry Classes
- 84 Job Opportunities
- 24 Recall Announcements