Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Outdoor Reset - how to install on WM - GV90
todd_14
Member Posts: 18
What parts do I need to install and program ODR on. Weil McC. Gv90-6??
I have a Taco 6 zone controller running 2 taco circulators.
I can’t find any other info in the manual or on the WM website.
the controller has a 2 wire connection jack for outdoor reset.
I have a Taco 6 zone controller running 2 taco circulators.
I can’t find any other info in the manual or on the WM website.
the controller has a 2 wire connection jack for outdoor reset.
Thoughts on installing a different brand ODR unit?
Thanks for you assistance.
0
Comments
-
Do you have an outdoor reset control? I don’t think it is built into that control.
Not much info on what the outdoor sensor plug is for.Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements