Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

CG4 boiler controller model 1107-1 "clicking" on controller, will not go past TSTAT and Limit

havens22
havens22 Member Posts: 1
edited January 24 in Gas Heating
Hi folks,
We just suffered a pretty nasty winter storm up here and of course the power is out and getting colder in my house by the minute due to the boiler not turning on. We are running the house on a champion generator, and we have run the boiler off of it in the past without any issues. For some reason, the control module seems to be in a stuck state. We have the green power light on and the blower motor is turning on, but it continuously blinks red lights simultaneously for the TSTAT/CIRC and the LIMIT while making a "clicking sound" while they blink together in perfect sequence. I don't possess a volt meter at home so I'm unable to check if everything is getting the correct amount of voltage, but I was hoping to be able to get it operational. The boiler is a model CGs-4 PIL, and the controller is a 1107-1. Any input would be appreciated!.