Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Burnham Induction Fan

PrestonR
PrestonR Member Posts: 1
in THE MAIN WALL
Hi, I am looking for a replacement Burnham Induction Fan assembly 6116056 for a Revolution Boiler. Not seeing any with suppliers I am contacting. Thanks in advance if any thoughts on where to source this!

Comments

  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,214
    edited December 2022
    One website (not the one below) listed this as the replacement:

    https://www.midwestapplianceparts.com/66056-pa-p-48752
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • Karl Reynolds
    Karl Reynolds Member Posts: 67
    Just checked with my Burnham rep. The 6116056 has been obsoleted with no replacement. With any luck, the link cited above will have an aftermarket replacement. If not, it's boiler replacement time. I'm a Burnham fan and have sold hundreds in my time, but if yours is a Revolution or XG2000 those were duds.

Categories