Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Pair Bosch Cr 100 RF with receiver
Options
Pyr0technicien
Member Posts: 1
Hi,
I reset my receiver next to my heater and I can't get the thermostat into pair mode.
Manual mention to press auto and return key at the same time but when I do nothing happen.
The error code is a21 1031
Any help ?
I reset my receiver next to my heater and I can't get the thermostat into pair mode.
Manual mention to press auto and return key at the same time but when I do nothing happen.
The error code is a21 1031
Any help ?
0
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 430 Carbon Monoxide Awareness
- 122 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.9K Gas Heating
- 115 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 395 Solar
- 15.8K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements