Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Buderus GB142 Parts Cheap and quick shipping

Options
mans442
mans442 Member Posts: 5
edited September 2023 in Buy, Sell, Barter

Hello all,

We have stock in a variety of Buderus GB 142 used parts in good working condition. We can ship quickly or arrange for pick up if your system is down. We are located in the Seacoast NH area, near RTE 95 and RTE 101. See Listing below for available items with corresponding SKU numbers:

Spare parts are becoming harder to find and new parts are often backordered and expensive.

UBA3 Controller Rev 3.5 - SKU# 871860 -MSRP: $640 for new unit. Your price $250.00

Combustion Air Fan -MSRP $440! Your Price: $220.00

Gas Control Valve - MSRP $300.00, Your Price: $150.00

External Connection Board SKU# 7099042 MSRP $250, Your Price: $100.00

External Control Boards (White panel with adjustable knob with LED display) $100.00

Low Voltage Wire Harness: MSRP $340 - Your Price: $160.00

High Voltage Wire Harness: MSRP $380 - Your Price: $150.00

Used TACO Recirculation Pump - $50.00

Used Grundfros Recirculation pump - $60.00

Good Used lower Condensate Plate with BRAND new Seal for 24-30kw Condensate Collector SKU 7098824 MSRP: $150, Your Price $50.00

USED but very clean 24-30Kw HEAT EXCHANGER with NEW Revision Set Air Vent - MSRP $900 new, Your Price: $350.00 (Can send photos if interested)

Used Ionization Electrode SKU 78195 MSRP $80, Your Price: $40.00

Used Hot Surface Ignitor SKU 7099006 MSRP $150, Your Price: $75.00

Safety High Limit Sensor SKU 78194 MSRP $165, Your Price: $85.00 or best offer.

NTC Supply/Return Sensors (Two available) SKU 7100136 MSRP $100, Your Price: $40 for one, $50 for a pair!

Revision Set Air Vent BRAND NEW! SKU 7098822 MSRP $60, Your price: 30.00


 We have other parts not listed, please inquire with your needs.


We have other parts available as well, and can offer help with troubleshooting.

Comments

  • coneheads5
    coneheads5 Member Posts: 1
    Interested in the 78184 Blower Fan! Willing to pay for shipping fedex or UPS. Please let me know if it’s still available? My GB142 blows the UBA3 fuse immediately on applying power BUT if the blower is unplugged the fuse doesn’t blow at all. It gives code 3L 214 as expected. It’s awaiting a replacement fan blower, right? Thanks so much.
  • mans442
    mans442 Member Posts: 5
    Sorry for delay in response. I now have a Blower fan and gas valve assembly combo in stock if still needed.
  • gcrb
    gcrb Member Posts: 3
    I am interested in the 78184 blower as well. Do you have another?
  • kcopp
    kcopp Member Posts: 4,577
    I have a good used one if they dont....
  • gcrb
    gcrb Member Posts: 3
    kcopp, great! Where are you located? I believe mann442 is next door to me (Coastal NH) which would make picking up a breeze. gcrb
  • Big Ed_4
    Big Ed_4 Member Posts: 3,238
    Stocks running low ?

    There was an error rendering this rich post.

  • kcopp
    kcopp Member Posts: 4,577
    gcrb said:

    kcopp, great! Where are you located? I believe mann442 is next door to me (Coastal NH) which would make picking up a breeze. gcrb

    I am in the seacoast of NH. Dover, Rochester.
    PM me and we can figure out something.
  • gcrb
    gcrb Member Posts: 3
    mans442, thanks for the GB142 blower assembly. It installed quickly and worked out great. gcrb
  • zarbo
    zarbo Member Posts: 5
    Mans442, u still have all those spare parts for Buderus GB142-30 boiler? Zarbo
  • xyz_9021_slkfranco
    xyz_9021_slkfranco Member Posts: 1

    Hello, i have a buderus 124-24 gas boiler. I am looking for a used UBA3 controller that is in good working condition to replace the one that I have on the unit.

  • GW
    GW Member Posts: 5,060

    I have a brand new GB142-30, still in the box, if anyone has a hankering

    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • zarbo
    zarbo Member Posts: 5

    Hi Gary….How much for that new GB142-30 you asking?

  • jbrunlax24
    jbrunlax24 Member Posts: 1

    Good afternoon Wondering if you still have the UBA3 for the GB142

Categories