Need to replace my control

Ed Lentz_2

we installed a stadler viega Basic controller many years ago. It has worked fine until this week. It controls my boiler, runs the circ pump for a stadler manifold for 4 loops. and also, manages the mixing valve on the manifold. Do they make a controller that will replace this? Do I need the mixing valve component with newer controllers?
Thanks in advance for any insight

109A_5

Hello @Ed Lentz_2,
This may be one option.
https://www.ebay.com/itm/275515200488

Ed Lentz_2

Ha might be.   I found a tekmar 360.  

pedmec

@hot_rod would know. I believe he deals with all that stuff. Or call Viega direct and let them tell you what you should use