Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Tekmar type 117 - 1 1/4" OR type 116 - 1" mixing valve needed

copjsd
copjsd Member Posts: 2
edited October 2022 in THE MAIN WALL
I'm in search of a Tekmar type 117 - 1 1/4" or a type 116 - 1" 4-way mixing valve. They have been discontinued and all of my searches have been fruitless. If anyone would share with me the whereabouts of a new or used (in functional condition) it would be greatly appreciated! Please contact Joe at 412-480-6250 or copjsd@comcast.net . Thank you!

Comments

  • hot_rod
    hot_rod Member Posts: 23,392
    Supply House.com shows them available 
    Danfoss, Belimo are other options. I think the mount holes are the same
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • copjsd
    copjsd Member Posts: 2
    Hello, Bob, and thank you for your reply! I spoke with Supply House and they haven't had the type 117 (1 1/4" 4-way mixing valve) in years. All the newer mixing valves have a different CV rating as well as won't fit the installation area without a substantial rework of the copper. I would even size down to a Tekmar type 116 (1" 4-way mixing valve). Please, I'm open to any suggestions!
  • hot_rod
    hot_rod Member Posts: 23,392
    I’ll bet some of the tekmar reps might have some on the shelves yet.
    Where are you located?
    Rathe and Associates in NY has a room full of older tekmar parts 
    Shamrock in Colorado
    Lundquist in Salt Lake
    check the tekmar site for other reps.

    E Bay?

    What is wrong with the old one? Not much inside them, unless the vanes are broken?

    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream

Categories