Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

AO Smith Burkay Replacement

Sonor3000
Sonor3000 Member Posts: 16
in Radiant Heating
All: Not sure I've seen this post yet.

I'm looking to replace my old AO Smith Burkay 240K-BTU HW Boiler. It is likely from the 60's based upon some feedback. Contractor is suggesting Trinity TFT. I understand at 180F these are not as "efficient" as if we ran at 140ish F.

Does any one have experience good bad or indifferent with these boilers?

Comments

  • mattmia2
    mattmia2 Member Posts: 10,682
    Do you need to run at 180? What emitters is is connected to?
  • Sonor3000
    Sonor3000 Member Posts: 16
    mattmia2 said:

    Do you need to run at 180? What emitters is is connected to?

    Connected to old cast iron radiators. The current boiler runs at 180F, so I thought I would keep it the same to "match" the heat.

Categories