Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

System 2000 Frontier

Options
MEWOLF64
MEWOLF64 Member Posts: 13
in THE MAIN WALL
I'm having a System 2000 Frontier installed next week. I've done alot of research on different boilers. I really like what I've read on this system.Also glad I found this web sight. It's good to see the president of Energy Kinetics taking part in the discussions here.
szwedjRoger

Comments

  • DJD775
    DJD775 Member Posts: 252
    Options
    Good decision and good luck with your new boiler.
  • Roger
    Roger Member Posts: 333
    Options
    I hear he occasionally posts on here when the opportunity arises…
    Thank you for placing your confidence in Energy Kinetics, @MEWOLF64 .  I’m sure your household will enjoy many years of efficient heating and long hot showers.Please let us know if we can assist in any way.
    Best,
    Roger
    President
    Energy Kinetics, Inc.
    Robert O'BrienRich_49MikeAmann
  • HVACNUT
    HVACNUT Member Posts: 5,841
    Options
    Seems like a good place for before and after pics.

    STEVEusaPAMikeAmann
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    I will post some pictures once I figure out how to do it. :)
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options


  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    So here is my 25 year old new yorker with a coil for hot water being replaced tomorrow B)
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    If I did it right you will see a photo.
    Robert O'Brien
  • Robert O'Brien
    Robert O'Brien Member Posts: 3,541
    Options
    Great choice!  
    To learn more about this professional, click here to visit their ad in Find A Contractor.
    Roger
  • HVACNUT
    HVACNUT Member Posts: 5,841
    Options
    That circulator must be fun to replace. You need to drain the whole boiler. 
    How many zones? I see the split x3 returns. Everything is piped in 3/4 to the zone(s)?
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    That whole system is going by by today 
    STEVEusaPA
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options

    almost there
    Rich_49
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    Dodge Energy out of Gorham Maine doing this install coming back today to finish up.
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    The job is finished I think they did a good job.

    STEVEusaPARogerMikeAmann
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    The job is finished. I think they did a good job.
    STEVEusaPARoger
  • HVACNUT
    HVACNUT Member Posts: 5,841
    Options
    Nice job. Good luck with it.
     
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    Hello everybody just an update on my System 2000. It's working great I'm using less than 100 gal. a month.During the summer I barely used any oil for hot water. I'll know better after a year goes by. I know in 2021 I used 750 gal. of #2 heating oil.
    szwedjSTEVEusaPA
  • MEWOLF64
    MEWOLF64 Member Posts: 13
    Options
    The 750 gal. was with my old new yorker with a coil for domestic hot water.
  • jhey
    jhey Member Posts: 1
    Options
    MEWOLF64 said:
    Hello everybody just an update on my System 2000. It's working great I'm using less than 100 gal. a month.During the summer I barely used any oil for hot water. I'll know better after a year goes by. I know in 2021 I used 750 gal. of #2 heating oil.
    Now that it has been more than a year, can you tell us how your oil consumption changed?  I'm debating upgrading or replacing my unit.  I kinda need to know asap, so ballpark numbers are fine!
    Thanks.

Categories