Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
WANTED: Longwood Dial Fuel Furnace Drafter or draft control on ash door.
lew1
Member Posts: 1
I need the draft control that mounts on a Longwood Dual Fuel Furnace ash clean out door. Please let me know if you have one. I have the cover that covers the hole that it is mounted on.
0
Comments
-
Hi, I don't know if this site will help: https://sites.google.com/site/longwoodfurnace/spare-parts-information
Yours, Larry0
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 892 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements