Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Boiler weight

bclev77
Member Posts: 1
in Oil Heating
I have an old 1960s 6 section oil fired boiler that I have busted apart it stands about 5foot tall cast iron how much can I expect these sections to weight?
0
Comments
-
If you broke it in section no big deal . if you need less weight bust up the sections ....
There was an error rendering this rich post.
0 -
Assuming it is a typical large house boiler with six sections I would guess about 1100 pounds for wet base and about 800 for dry base.0
-
I would guess 150lb each section average front & back are heavier0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 423 Carbon Monoxide Awareness
- 102 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 102 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 67 Pipe Deterioration
- 935 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements