Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Need name of a LWCO fitting

delcrossv
delcrossv Member Posts: 1,165
in Strictly Steam
Can someone tell me the name of an iron fitting sort of shaped like a ball or two cones with a water line marked on it to mount a probe LWCO external to a boiler?

Someone posted one here on an install they made, and for the life of me I can't remember what the darn thing is called.

Thanks!
Trying to squeeze the best out of a Weil-McLain JB-5 running a 1912 1 pipe system.

Comments

  • MikeAmann
    MikeAmann Member Posts: 1,044
    edited November 2021
    I recently installed a SafGard LWCO. Those special tees can be seen in these instructions. Hope this helps. https://s3.amazonaws.com/s3.supplyhouse.com/product_files/Hydrolevel-45-170-Install-Instructions.pdf

    I am in the process of upgrading my controls, and I will no longer be needing my LWCO, since this function is built in. I will sell it cheap if you need it. And I added a combo buzzer/flashing LED to it. It's the bright blue box in this pic.

    delcrossv
  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 9,130
    edited November 2021
    I think the technical term is "that LWCO fitting thingie"

    here is the part number


    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

    MikeAmannPC7060delcrossv
  • delcrossv
    delcrossv Member Posts: 1,165
    Bingo! Thanks!
    Trying to squeeze the best out of a Weil-McLain JB-5 running a 1912 1 pipe system.
    MikeAmann

Categories