Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Anyone have experience with Weil-McLain Aqua Pro indirect water tank?

Jersey2
Member Posts: 103
Most likely I will be getting an indirect water tank. I was reading about the Weil-McLain Aqua Pro. It has a non metallic tank and no anode, and it says it is good for harsh water that many wells have. Does anyone have experience with this tank? Is it as good as the specs say? I will put a link to the tank here:
https://weil-mclain.com/products/aqua-pro
https://weil-mclain.com/products/aqua-pro
I'm not a plumber or hvac man and my thoughts in comments are purely for conversation.
0
Comments
-
It looks like they're rebranding the tank made for Burnham:
https://www.usboiler.net/product/alliance-sl-high-efficiency-water-heater.html
I only see these used in New Jersey where the water quality is tough on other indirects.Contact John "JohnNY" Cataneo, Master Plumber for Consulting Work
Or for plumbing in NYC or in NJ.
Or take his class.0
Categories
- 117.6K All Categories
- 82.8K THE MAIN WALL
- 2.7K A-C, Heat Pumps & Refrigeration
- 43 Biomass
- 403 Carbon Monoxide Awareness
- 8 Chimneys & Flues
- 1.6K Domestic Hot Water
- 4.3K Gas Heating
- 107 Geothermal
- 148 Indoor-Air Quality
- 2.7K Oil Heating
- 45 Pipe Deterioration
- 679 Plumbing
- 4.8K Radiant Heating
- 353 Solar
- 13.3K Strictly Steam
- 2.9K Thermostats and Controls
- 48 Water Quality
- 31 Industry Classes
- 65 Job Opportunities
- 11 Recall Announcements