Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
WHY DIDNT I THINK OF THAT
Options
Jackmartin
Member Posts: 202
I hope everyone is well given all the crap we have going on. I was watching YouTube and I saw a new plumbing channel from the UK. I am very familiar with the UK ,so my curiosity took over. The channel is called PB PLUMBER and he is a very good tradesman. On his channel he has the tip of the week and when I saw this tip all I could say was " why didn't I think of that ". The youngster had a vertical pipe full of water and he smiled and said don't you just hate this, impossible to solder, too true. Then he pulls out the sprayer from a spray bottle puts the siphon in the pipe and sprays the water out of the pipe, no water. I have used straws, wet dry vacuum cleaners when I had one or just boiled the water out with the torch being splashed with boiling water. This is like so many great ideas, its so simple its genius. I have tried it and it works like a charm. Stay Well and Be Blessed Jack
1
Comments
-
I Will watch that channel. Thanks.
Edward Young Retired
After you make that expensive repair and you still have the same problem, What will you check next?
0 -
Old hat, I have been doing this for longer than I can remember. I thought everyone knew this.0
Categories
- All Categories
- 87.5K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 430 Carbon Monoxide Awareness
- 122 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.9K Gas Heating
- 116 Geothermal
- 169 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 395 Solar
- 15.9K Strictly Steam
- 3.5K Thermostats and Controls
- 57 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements
