Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Buderus GB142 fault code
chief
Member Posts: 28
Hello all, I have a buderus GB142 that is giving me a fault code of C3. This is not listed in the manual, I was wondering if anyone knows what this code is? The boiler was serviced a couple of months ago. Thanks for the help in advance.
0
Comments
-
Looks like you need a new fan/blower
1 -
Everything was good. Noticed at low speed a squeak in the bearings not detectable on high speed. Is the motor available separate vs the whole inducer motor and blower as an assembly? Found the replacement on supply house, but not the motor as a component alone.0
-
It is a complete assembly, not just the motor itself. Kind of pricey too I recall0
-
Lol what isn’t expensive these days? Thanks for the help.0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements