Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Not New,but WHY? sound of electrodes for first 45 to 60sec. Flame is on from start

LS123
LS123 Member Posts: 475
in THE MAIN WALL
hello!
I was wondering if it is normal for the to hear the sound of electrode for about first 45 to 60 seconds... then sound goes away... and it seems like flame gets brighter once the clicking noise from electrodes stops...
As far as I remember it was like that....Is this normal? just wondering...
thank u ans best!
\-LS123
Thank you!
@LS123

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    Oil? Depending on primary control and how it’s programmed, ignitor stays on during trial for ignition, then shuts off.

    There was an error rendering this rich post.

    LS123
  • LS123
    LS123 Member Posts: 475
    thanks @STEVEusaPA ... yes the burner is oil...i think the burner is from 2008.. use .85 GPH and 80 or 90...... Nozzle... I was wondering if it should be doing that ... perhaps and most likely things are working as designed and implemented.... thank you again!
    Thank you!
    @LS123

Categories