Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit

Calleffi 502113A Air Vent

Docfletcher Member Posts: 476
Received 3 of these today, all of them had bent stems preventing insertion into the service valve. I thought about bending the stems back but I was concerned about breakage. I sent all three back to be on the safe side. I noticed these are packed in CaleffI packaging that allows the parts to move very freely inside the box's. I speculate that's how the stems became bent.


  • BillyO
    BillyO Member Posts: 261
    Honeywell come same way, just bend them straight
Sign In or Register to comment.


It looks like you're new here. If you want to get involved, click one of these buttons!