Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Valve indentification

KC_Jones
KC_Jones Member Posts: 5,722
I bought some industrial drawer cabinets from a friends father recently.  This man kept everything, so I’m having to sort through and throw away the junk.  Well among all the stuff I came across this valve, that appears to be NOS and never installed.

On the top it says Webster Camden,NJ

Any insight is appreciated, maybe @Steamhead ?
2014 Weil Mclain EG-40
EcoSteam ES-20 Advanced Boiler Control
Boiler pictures updated 2/21/15

Comments

  • Intplm.
    Intplm. Member Posts: 1,880
    Not sure but it looks a lot like a PRV that is adjusted with a special key and has a screw type set point stop?
  • Steamhead
    Steamhead Member Posts: 16,796
    It's a straight-through radiator valve with a socket for an extension stem, as would be used in a window seat or similar enclosure, so the knob would be accessible outside the enclosure.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    mattmia2KC_Jones
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,452
    Looking at the top it says Webster. Looks like a control valve minis the actuator, or maybe manually operated
  • KC_Jones
    KC_Jones Member Posts: 5,722
    Excellent responses, thanks for the feedback, now the real question does it have any value and would anyone want it?

    Honestly for the regulars around here I’d send it to you for shipping cost, it’s no good for me on my system.
    2014 Weil Mclain EG-40
    EcoSteam ES-20 Advanced Boiler Control
    Boiler pictures updated 2/21/15
  • Steamhead
    Steamhead Member Posts: 16,796
    KC_Jones said:

    Excellent responses, thanks for the feedback, now the real question does it have any value and would anyone want it?

    Honestly for the regulars around here I’d send it to you for shipping cost, it’s no good for me on my system.

    I'll bite! Contact me off-list to set it up.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    KC_Jones
  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 7,713
    Real ID is available at the DMV. but you must bring a valid Passport, Birth Certificate, an electric bill with your address, your social security card, verification form your Priest, Rabbi, or Minister, 3 credit cards, and your Income Tax Returns for the last 7 years.

    Without that, you may never know the Valid ID of it.

    I Said VALVE

    Oh, Nevermind!



    Edward F Young. Retired HVAC ContractorSpecialized in Residential Oil Burner and Hydronics
    KC_Jones