Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Buderus st200 gasket

clammy
Member Posts: 2,896
Hoping someone has a part number for a older buderus st200 indirect .the units about 20 years old and has never been cleaned it’s a little slow to recover and shows no signs of leakage but with out a replacement gasket I’m a little reluctant to attemp dis assembling and cleaning w out a new gasket on hand thanks . I llworry bout the anode after the fact Peace and good luck clammy
R.A. Calmbacher L.L.C. HVAC
NJ Master HVAC Lic.
Mahwah, NJ
Specializing in steam and hydronic heating
NJ Master HVAC Lic.
Mahwah, NJ
Specializing in steam and hydronic heating
1
Comments
-
-
Thanks hopefully it the right gasket peace and good luck clammyR.A. Calmbacher L.L.C. HVAC
NJ Master HVAC Lic.
Mahwah, NJ
Specializing in steam and hydronic heating0 -
I have one still in the bag ... but, it's for the ST151.0
-
Good judgement not to disassemble without a new gasket on hand; one of mine disintegrated during removal (younger unit than yours). Glad to have replacement gaskets on hand.0
Categories
- 120.8K All Categories
- 83.8K THE MAIN WALL
- 2.8K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 416 Carbon Monoxide Awareness
- 36 Chimneys & Flues
- 1.7K Domestic Hot Water
- 4.7K Gas Heating
- 116 Geothermal
- 154 Indoor-Air Quality
- 2.9K Oil Heating
- 49 Pipe Deterioration
- 754 Plumbing
- 5.3K Radiant Heating
- 358 Solar
- 13.9K Strictly Steam
- 3K Thermostats and Controls
- 50 Water Quality
- 37 Industry Classes
- 70 Job Opportunities
- 14 Recall Announcements