Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
NTI Matrix Boiler ER4
JDenasio
Member Posts: 3
in Gas Heating
I have a NTI Matrix boiler that shows a ER4 code when the furnace component starts up. There’s no issue when there is a demand for hot water only when the furnace turns on.
I replaced the low pressure switch, manifold limit and stack limit.
Any help will be greatly appreciated. Thanks
I replaced the low pressure switch, manifold limit and stack limit.
Any help will be greatly appreciated. Thanks
0
Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 117 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 111 Geothermal
- 163 Indoor-Air Quality
- 3.7K Oil Heating
- 72 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements