Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Home running CI rads off a manifold
Options
Mbyrnes92
Member Posts: 16
Looking to repipe my house with pex al pex using home runs off a manifold to rads. I have the existing b and g pump still on the boiler on the supply side, can I use that with this setup? Also, would it be wise to look into a manifold with a mixing valve option? Any info would be greatly appreciated.
0
Comments
-
0 -
0 -
We would need to know what kind of boiler you are using and what water temperature you will run the system at0
-
Old Beckett oil burner with 155000 btu I believe0
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements