Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

3/8 PEX Recommendation

TAG
TAG Member Posts: 755
I'm having a little problem getting the 3/8 PEX for my under floor radiant panels. Used Viega 1/2 for the slab on this project .. have the 1/2 Mr Pex Al for the Warmboard. No one seems to have the Veiga 3/8 in 1000' .... The Mr Pex I found is on the west coast. I'm finding the Bluefin .... is that not from China ? The Wirsbo is < 3x the cost

Comments

  • hot_rod
    hot_rod Member Posts: 22,100
    Rehau is a Pex a, that is extruded in Alabama, they offer 3/8 size.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • TAG
    TAG Member Posts: 755
    Having problems finding Rehau as well online ... used that years ago.

  • hot_rod
    hot_rod Member Posts: 22,100
    Any supply house the stocks it could arrange shipping. Contact the area rep they usually know who has stocking inventory.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream