Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Parts needed for cam industries boiler

zepfan
Member Posts: 309
Does anyone know where parts can be gotten for a Cam Industries electric boiler? We have one that was manufactured in 1978 ,208 volt three phase, that is in need of new elements. I thought that these would be rather easy to get much like getting elements for a commercial electric water heater, but that is proving not to be the case. Thanks to all.
0
Comments
Categories
- 112.8K All Categories
- 81.2K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 37 Biomass
- 394 Carbon Monoxide Awareness
- 2.7K Controls
- 1.4K Domestic Hot Water
- 3.8K Gas Heating
- 101 Geothermal
- 133 Indoor-Air Quality
- 2.4K Oil Heating
- 32 Pipe Deterioration
- 582 Plumbing
- 4.3K Radiant Heating
- 334 Solar
- 12.3K Strictly Steam
- 38 Water Quality
- 11 Industry Classes
- 53 Job Opportunities
- 8 Recall Announcements