Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Radiator Identification
bboepple
Member Posts: 6
What is this radiator and where can I find one???
0
Comments
-
Generically, that's a ding room radiator. Several companies made them. To me this looks very similar to an American Hot-Closet radiator, but the pattern on the doors is different. I haven't found an exact match yet.
Where can you find one? In your dreams, pal. Cast iron radiators are hard to find, and if you want something special, like one of these or a plate warmer or window radiator, good luck.Just another DIYer | King of Prussia, PA
1983(?) Peerless G-561-W-S | 3" drop header, CG400-1090, VXT-240 -
@bboepple, those date back to the late 1800s/early 1900s and were used in dining rooms to warm plates and food. Here's some literature on one from 1903: https://heatinghelp.com/heating-museum/national-radiator-company-1903/
As far as finding one, yes they are rare, but here are some places that sell used radiators: https://heatinghelp.com/systems-help-center/where-to-find-used-radiators/
And Castrads makes radiators. They are not like this one, but they are beautiful. https://www.castrads.com/us/President
HeatingHelp.com2
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 95 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements