Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Larrs Endurance issue
danitheplumber
Member Posts: 87
Had a Larrs Endurance combi boiler with error code 123 which is a purge rate proving failed but no solution to error code in manual. I reset it and when I would run hot water to call for hot water it would prepurge for a five seconds then flame would go on for five seconds and then post purge for five seconds and started all over again and wouldn't stop. Anyone seen or know why it would do this type of cycling?
0
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 95 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements