Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

"Power Flame Burner " C-2 G 15; for sale

DKD228
DKD228 Member Posts: 1
edited January 2020 in Buy, Sell, Barter
"Power Flame" High Output Gas Conversion Burner Unit , - $450 obo; (Millville, NJ)



Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,388
    serial # starts with 0792 that's July 1992
  • Steamhead
    Steamhead Member Posts: 17,361
    edited January 2020
    @DKD228 , what model boiler was it on?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,388
    It has the scotch marine style blast tube on it, usually used in a boiler with some back pressure in the fire box. I think it's fixed fire don't see any linkage from gas valve to air damper
  • B_Sloane
    B_Sloane Member Posts: 56
    straight Oil ..??
    GLWS :)
  • ScottSecor
    ScottSecor Member Posts: 897
    The 'G' in the model number implies this is a gas only burner (C2-G-15). The '15' means it has a 1.5" gas train, or at least the orifice tee is 1.5". The C2 is the frame, C1 for the smallest, C5 used to be the largest, not sure that is still the case.