Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Argo 6P Controller was making noise now one of the zones not working
got2blev
Member Posts: 2
I have a Argo 6P with 6 zones setup to it. Suddenly my controller was making a chattering noise and after I turned off and on the power to the boiler one of my zones (Zone 1) is not responding. What do you think it could be? A relay? see attached pictures below
0
Comments
-
No pics, but yes, probably need to replace associated cube relay.
There was an error rendering this rich post.
0
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 98 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements