Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Last crazy question for a bit

Tom_133
Tom_133 Member Posts: 910
in THE MAIN WALL
Anyone have the honor of building a homemade pasteurizer yet?

I got a guy who wants to make one thats about 4'x4'x4' tall and will heat by boiler or on demand up to 170 or so.

I was thinking of doing a 150k btu boiler and wrapping the inside of his tank with 1" coils and feeding the thing with 1-1/2" copper header and see what we can do.

Any other ideas, the guy was suggesting steam.
Tom
Montpelier Vt

Comments

  • motoguy128
    motoguy128 Member Posts: 393
    The trick is to use a lot of temperature transmitters in different locations to verify it’s heating evenly and the profile meets your requirements. If theres a cold spot, then some
    Product light not be at temperature long enough. You need a bunch of RTDs and a multiple channel data logger.

    The some thing is done on large
    Commercial ovens.
    Gordy

Categories