Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Hydrostat3250Plus position of jp2 jumper.

inthewind
Member Posts: 2
in Oil Heating
What is default position of Jumper on JP2 on the circuit board?Across first two pins or second two pins.
0
Comments
-
This is just a guess, but from several pictures of this control fornd on the inter-web, and the world wide net, it appears to be the first two. The pin closest to the digital display and the center pinEdward F Young. Retired HVAC ContractorSpecialized in Residential Oil Burner and Hydronics0
Categories
- 121.3K All Categories
- 84K THE MAIN WALL
- 2.9K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 417 Carbon Monoxide Awareness
- 40 Chimneys & Flues
- 1.7K Domestic Hot Water
- 4.7K Gas Heating
- 119 Geothermal
- 155 Indoor-Air Quality
- 3K Oil Heating
- 56 Pipe Deterioration
- 771 Plumbing
- 5.4K Radiant Heating
- 362 Solar
- 14K Strictly Steam
- 3K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 73 Job Opportunities
- 17 Recall Announcements