Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Old Burnham
wesPA
Member Posts: 38
Stumbled across this in an old basement today... I saw a few posts from the past on similar models. I never knew Burnham started in NY. I am curious when they started production in Lancaster, as that is where this boiler is. Looks like it was converted to oil before being torn apart
0
Comments
-
Because that is a steel boiler it must have been made elsewhere0
-
There was a whole thread here on the history of Burnham. I do remember something about them starting in NY or had another branch there.
Now Burnham is under US Boiler.There was an error rendering this rich post.
0 -
The Burnham brand started in Irvington NY. In 1923, the first operations started in Lancaster in the form of a foundry and machine shop, but were expanded to production in subsequent years. The brand is now fully manufactured by U.S. Boiler in Lancaster. Burham Commercial (a separate division) is also based in Lancaster as well.1
-
Thanks for the response Mike!0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements