Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
What brand and model domestic how water mixing valve do you use
bob eck
Member Posts: 930
When installing a condensing combi boiler like the Lochinvar Noble or Burnham K2WT with a brazed plate heat exchanger to make domestic hot water what brand and model mixing valve are you using?
0
Comments
-
Can't beat a Honeywell AMX in my opinion, but don't combi units have one already installed from the factory? I'm an indirect guy, not real familiar with combis0
-
Honeywell AMX is great.
I have also used many Symmons brand mixing valves for commercial and residential use.0 -
take a look at the 520, straight thru piping, very accurate on tankless and combiis
https://www.caleffi.com/sites/default/files/styles/product_photo/public/file/520516a.jpg?itok=72Po2JCs
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream2
Categories
- All Categories
- 85.9K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 78 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 94 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 59 Pipe Deterioration
- 886 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements