Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Standing pilot furnace

walters16
Member Posts: 1
The pilot is lit and strong thermocouple is a nice even red but the gas isnt kicking on for the burner to light. Any ideas?
0
Comments
-
Plenty of ideas.
Thermostat, relay, spill switch, rollout switch, gas valve, broken wire or poor connection, poor inlet gas pressure. To name a few.
If you have an electrical meter, post some pics of the furnace and wiring diagram, we might be able to help. If it's a pressure problem, a manometer will be needed.
If you dont have a meter and are not handy you'll need to call a pro.
There's a find a contractor in your area link at the top of the page.0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 975 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements