Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Megapress pipe prep?
wcs5050
Member Posts: 134
Just about to get into a 3/4 BMI job will be a lot easier with megapress. What are people doing, if anything, to prepare outer pipe wall for the joint to be made?
0
Comments
-
Well you’re supposed to get the training and get the card for your wallet. The mega tool kit comes with all the tools to prep the pipe. At times I simply clean the pipe with open mesh sand cloth, not down to bare metal but maybe 1/2 way. We use a mini band saw too0
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements