Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Is your tank half full, or half empty?
Comments
-
I wanted to mention that I was intrigued by this project and decided to build it. I modified the PVC side of things somewhat to make a better seal using a nitrile O ring to seal the fuel fumes out.
It was fun to do and cost about $40. One big issue I had was that the wire connections were incorrect in the instructions. They have since been fixed.
It is somewhat amazing what can be done for such low cost. The community around the computer part is cutting edge of the imagination gone all IoT (Internet of Things).
Thanks for your post, without it I would not have been aware.
1
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements