Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Old Hoffman

jrob50
jrob50 Member Posts: 1
in Strictly Steam
Any ideas on where to get a cage for the trap and how to service the valve?

Comments

  • delta T
    delta T Member Posts: 884
    @Sailah would know, here is an old thread detailing someone having to replace the cage units in hoffman no. 18 traps.

    https://forum.heatinghelp.com/discussion/157785/steam-traps-hoffman-no-18
  • Sailah
    Sailah Member Posts: 826
    edited October 2018
    Hoffman #18 takes a 2211 cage unit from Barnes & Jones. Cover is reused. That trap should have an integral seat (i.e. just a hole drilled down through and not a removable hex seat).

    Be very careful when removing that old cover and apply equal torque in opposite direction to not strain the piping
    Peter Owens
    SteamIQ

Categories