Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Replace Entire Boiler or Just Block?
dkirkwood
Member Posts: 21
Moved this question to The Wall, to get more feedback. Thanks for the one reply, regarding a new boiler being a selling point.
0
Comments
-
Replace the whole boiler. If you're going to sell the place, a brand-new boiler is a great selling point.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
less headaches and probably faster especially with a smaller boiler0
-
We've replaced just the boiler blocks and a section on a few occasions over the years on residential jobs over the years. Too risky and your'e never really sure what your going to find until you split the sections apart. About half of these jobs turned into complete replacements when we we were done, not the outcome anyone wanted.
I suggest replacing the entire boiler for residential jobs.0
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 98 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements