Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Radiator Enclosures

Options
HeatingHelp
HeatingHelp Administrator Posts: 637
edited February 2018 in THE MAIN WALL
Radiator Enclosures

Read the full story here


Comments

  • Bigbri0104
    Bigbri0104 Member Posts: 28
    Options
    Hello,
    I have a question on the "D" dimension. What is the height of the "D" dimension in the radiator enclosure picture?

    Thanks,

    Brian
  • the_donut
    the_donut Member Posts: 374
    Options
    Bigbri0104 said:

    Hello,
    I have a question on the "D" dimension. What is the height of the "D" dimension in the radiator enclosure picture?

    Thanks,

    Brian

    Width of radiator + 2” each side (4”).
  • Bigbri0104
    Bigbri0104 Member Posts: 28
    Options
    Thanks for the information, however I was referring to the illustration on the bottom left hand corner where it states "No Change" in reference to calculating EDR.
    In the illustration vertical dimension "D" is shown. What is the measurement from the top of radiator to the top of the radiator enclosure?
  • Gsmith
    Gsmith Member Posts: 432
    Options
    from the chart in Dan's article D = A.
  • Bigbri0104
    Bigbri0104 Member Posts: 28
    Options
    Thanks

Categories