Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Miximizer does not stay on
Dramatica
Member Posts: 1
We recently had the manifolds for our radiant system replaced. This is a weekend house in the Northeast, so we use remote thermostats to turn on the radiant about 24 hours prior to our arrival. Now the house will not heat up. The call for heat comes through, the boiler turns on, the Miximizer starts and then in a few minutes, the whole thing shuts down. Of note, due to our own negligence, we allowed our propane tank to go to empty while out of the country. There were no frozen pipes, but the system hasn't worked well since then.
Why doesn't the call for heat stay on?
Why doesn't the call for heat stay on?
0
Comments
-
How’s the level in the sight glass during firing?0
-
@Dramatica , we would need pictures and more information. Happy to help0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 75 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 93 Geothermal
- 150 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 856 Plumbing
- 6.1K Radiant Heating
- 373 Solar
- 15K Strictly Steam
- 3.3K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements