Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Replacing L8124A with Aquasmart 7600A wiring issue
Options
esandma
Member Posts: 9
I'm replacing my old Aquastat (HoneyWell L8124A) with a Beckett AquaSmart 7600A.
Looks pretty straightforward except that the L8124A did not have neutral connections to L2 or C2. It does have a neutral connection to B2, however.
Do I need to run a neutral wires to L2 & C2 terminals on the AquaSmart.
If so, can I just jumper the incoming neutral wire (B2) to these?
Thanks
Looks pretty straightforward except that the L8124A did not have neutral connections to L2 or C2. It does have a neutral connection to B2, however.
Do I need to run a neutral wires to L2 & C2 terminals on the AquaSmart.
If so, can I just jumper the incoming neutral wire (B2) to these?
Thanks
0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements